DIY Exterior Home Upgrade

Looking for a new DIY Exterior Home Project idea?

Upgrade your home's attic vents  to create a visual impact and increase curb appeal.

Attic ventilation plays an important part not only in cooling down attic space but adequate attic ventilation can actually prevent roof damage.

Your attic's vents should include:

  • intake vents, located typically at the lowest part of the roof under your eaves that allow cool air to enter the attic.  
  • exhaust vents, located at the highest parts of your roof that permit hot air to escape. 

Enhance the beauty of your attic intake vents by choosing one of the many custom designed grills available at ClassicGrills.

If you've surrounded your home with flowers, why not upgrade your attic's intake vents with Classic Grills custom flower designed grills? 
If your attic's intake vents run the entire length of your eave, Classic Grills offers custom made vents to fit any size, any curve you may have on your home. 
Just contact our team with any questions you may have at 

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |

DIY Home Projects - Why choose Classic Grills Resin for Air Vents, Grills or Registers?

What is the advantage of using Classic Grill's proprietary thermal resin for grills? 

Thermal resins that Classic Grills uses today were developed by NASA for use in the space industry.  These resins used by Classic Grills are a perfect fit for the architectural design industry. 

The durability and ability to create an array of designs and sizes in Classic Grill's resin sets Classic Grills apart from what is available on the market today. 

Classic Grills worked for many years to create a formulation that would be
  • Thermal. (both against high and low temperatures)
  • Rigid.  Being rigid is obviously critical to have in a final grill (air vent cover, register) which will not warp.
  • Moldable.  Classic Grills can form the material prior to full canalization to conform to a desired radius.
  • Paintable.  Paint adhesion to the grilles is truly important, especially with the temperature variation that grilles, air vents or registers are subjected to.
  • Nail-able.  Classic Grills in resin have similar characteristics to wood when it is pin-nailed or screwed.
  • Dimensionally Stable.  It is important that the resin does not expand nor contract with temperature variations experienced with a system as this can cause warping or a failure of adhesion to the resin surface.
  • Moisture Resistant.  Classic Grill's goal is to allow our customers to use Distinguished Design Grilles for both interior and exterior applications.

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  | 

DIY Furniture Project using Classic Grills Art Deco Grills

Breathe new life into your cupboards or cabinets with an easy DIY furniture upgrade!

Re-invent your cupboards or cabinets by replacing their doors with custom sized grills.

Let your decorating ideas flow!

Classic Grills Art Deco Grills have replaced the sliding doors of this home's entertainment storage center.  Build something extraordinary! 

Classic Grills  |  247 Venture St., Suite 100  San Marcos, CA 92078  |  760-213-0427  |

Re-painting a room?

Re-painting a single room?  Or are you re-painting your whole house? 

Customize your DIY paint project with Classic Grills Distinguished Design resin grills that can be shaped, painted and finished in many ways that have never been thought of before! 

Our grilles craftsman can turn your designs into a three-dimensional reality! 

Our experienced staff can answer all your questions from how to accent your newly painted room with a painted custom resin grill to helping you with special shapes or curves to match the flow of your unique surfaces in your home. 

Feeling tropical?  Consider our tropical themed resin grille!

Feeling outdoorsy?  Try our Flower resin custom grille cover!

Feeling like a King or Queen?  We have two designs, our Caspian Cross Resin grille cover

and our Iron Ring Pattern Grille can help with those creative designs!  | 247 Venture St., Suite 100  San Marcos, CA  92078  |  760-213-0427

Creative uses for air return vent covers

Easy DIY home upgrades! 

How long have we seen the same old, familiar grill covering over the air vents in our home?

Is it time for a change?   Of course it is time!

Pick a topic!  What brings romance to your thoughts?

How about a reminder of the renaissance era with a special era designed air vent cover in the dining room? 

Pair that new air cover vent with roasted pork and some new culinary knives and you have created an atmosphere worth revisiting night after night! 

And it's completely do-able!  DIY project that takes just minutes to accomplish!

Transform your living area! 

Classic Grills Distinguished Design Grills offers Classic Renaissance Grilles, Registers, Return Ai Registers, Air vent Covers in rectangular and round shapes that are available in over 200 sizes. 

Classic Grills decorative heat and air conditioning grills, registers, return air register overs and air vent covers come in a variety of styles as well as assorted metals and finishes. 

Finishes include Antique Burnished Bronze, Dark Oil Rubbed Bronze Finish, a light oil Rubbed Bronze Finish and a Satin Nickel White Bronze Finish. 

Bronze grills are great for floor grill covers or can be used for ceiling vents and wall vent covers. For curved surfaces, contact our sales team at

Aluminum grills are an inexpensive alternative to bronze grills.  Smaller sized aluminum grills are available for floor installation. 

247 Venture St Suite 100  |  San Marcos, CA  92078  |  760-213-0427

Our Classic Grapevine Design Grills, which can be used for custom air vent covers, as registers, for return air registers and more are available in twelve popular sizes.

Our Custom Grape Vine Grill or Grape Leaf Grille is pictured above with an Air Supply Damper.

Air Supply Dampers, also called Air Supply Louvers in an air vent cover regulate airflow.

Our Air Supply Dampers (or air supply louvers) assembly for our custom designed grilles, registers and air vent covers include:  a wheel lever for accuracy when regulating air flow, a recessed face-plate that allows your new grill to fit tightly against the wall, floor or ceiling.  Floor register covers include a sturdy inside grille to support heavy foot traffic for floor vent covers.

All of Classic Grills standard-sized air supply grills include an adjustable damper.  For sizes other than our standard sizes commonly available, contact our Classic Grills Sales Team for a quote at or call 760-213-0427.

Our DIAMOND pattern custom grill in resin is a simple design, but one that adds a delicate sophistication to a room.

The DIAMOND pattern design has been used in classical and contemporary projects as well as many other types of homes. 

Grills can be provided with or without O.B.D. Dampers.  Dampers can also be supplied separately.
Resin Grills can be provided with or without holes for screws.  Just let us know when ordering your new custom grill!

We use a proprietary thermal resin formulation in our resin grills.  Our grills can be supplied in any size, in both flat and concave or convex profiles to match the curve of a wall or ceiling.  Please visit our website at for recommended painting and staining instructions.